TRAVERSE Portable Curb Ramp, 1000 lb | Express Ramps
- Portable Curb Ramp.
- Built-in Carrying Handle.
- Perfect for Curbs or single steps.
Quick answer: Portable loading ramps let you roll hand trucks, carts, dollies and power equipment onto trucks, vans, trailers, docks and curbs instead of lifting. Our EZ-ACCESS TRAVERSE ramps are welded aluminum, made in the USA, run 2 to 14 ft long, hold up to 1,600 lbs and carry a 3-year warranty.
A permanent non-skid surface is bonded to every deck, so there is no grip tape to replace, and the aluminum will not rust. Built-in handles make each ramp a one-person carry, with no support legs to set up.
| Ramp | Lengths | Capacity | Price | Best for |
|---|---|---|---|---|
| TRAVERSE Walk Ramp | 4 to 14 ft | 1,200 lbs (850 lbs at 12 and 14 ft) | From $399.99 | Hand trucks and carts into vans, box trucks and docks |
| TRAVERSE Edgeless Ramp | 2 to 8 ft | 1,000 to 1,600 lbs | From $269.99 | Mowers and wide equipment; folds in half |
| TRAVERSE Curb Ramp | 27 in | 1,000 lbs | $159.99 | Curbs, single steps and landings up to 5.75 in |
Measure from the ground to the truck bed or dock, then go longer for a gentler push. Low trailers and single steps typically use 4 to 6 ft, pickup tailgates and cargo vans 6 to 10 ft, and high-deck box trucks or docks 10 to 14 ft.
The TRAVERSE Edgeless Ramp. It has no side curbs, so wide decks and zero-turn mowers can use the full 31 inch surface.
Yes. The rating covers the load, the hand truck or cart, and the person pushing it.
Yes. TRAVERSE Walk Ramps work for temporary loading or a fixed step, landing or dock transition.
Walk Ramps can work where a code-compliant ramp is not required. Edgeless Ramps are not recommended for people. See our portable wheelchair ramps .
Yes. The permanent non-skid surface grips in rain, snow, mud and grease. Clear ice and heavy debris before use.
Call 866-491-1110 with your deck height and load, or contact us online for a free recommendation.